欢迎访问济南大黄蜂工程机械有限公司官方网站!

冷再生机租赁

全国施工租赁热线

全国施工租赁热线

18366127778

您现在所在的位置 :首页 - 新闻中心 > 行业资讯 >

行业资讯

information

全国施工租赁热线

18366127778

山东大黄蜂工程机械有限公司

联系电话:18366127778

公司地址:济南市槐荫区经一路273号群盛华城2号楼1-404

行业资讯

盘点选择冷再生机施工体现出的5大优势?

来源:https://www.sddhfjx.com/ 日期:2021-05-14
  科技的飞速发展让人们对不同领域的知识都有了一定的涉及,人们可以通过很多渠道获得自己想要的,工程师提到其设备是一种道路施工中常用的机器,在此今天就给大家介绍一下使用冷再生机施工的优势体现在如下5个方面:
  With the rapid development of science and technology, people have a certain amount of knowledge in different fields. People can obtain what they want through many channels. Engineers renting cold recycling machine mentioned that its equipment is a kind of machine commonly used in road construction. Today, I would like to introduce the advantages of using cold recycling machine in the following five aspects:
  1、简化了施工过程。由于冷再生机铣工作是将原有的旧路面材料碾碎,在车体内,将碾碎的废骨料在搅拌腔中搅拌直接摊铺,省去了新骨料的挖掘、运输、搅拌站拌和加工、摊铺机摊铺等一系列工作。,简化了施工过程。
  1. The construction process is simplified. Because the cold recycling machine milling work is to crush the original old pavement materials, in the car body, the crushed waste aggregate is mixed in the mixing cavity and directly spread, which saves a series of work such as excavation, transportation, mixing and processing of mixing plant, and paving of paver. The construction process is simplified.
  2、避免道路施工造成的交通堵塞问题。由于冷再生机械在施工过程中省略了搅拌站的运输和搅拌过程,施工现场的设备投资相对较小。这有效地减少了由于道路建设而造成的交通流量,并产生了较大的负荷。因为冷再生机是在施工和道路施工过程中,我们可以选择半路施工和半路施工,这样可以在不影响交通正常使用的情况下修路。
  2. Avoid traffic jams caused by road construction. Because the transportation and mixing process of mixing station are omitted in the construction process of cold recycling machinery, the equipment investment on construction site is relatively small. This effectively reduces the traffic flow caused by road construction and produces a larger load. Because the cold recycling machine is in the process of construction and road construction, we can choose half way construction and half road construction, so that we can repair the road without affecting the normal use of traffic.
                冷再生机租赁
  3、施工效率高。传统的筑路工艺是先用铣刨机对废弃路面进行碾磨,然后运至搅拌站进行搅拌处理,再运回施工现场用摊铺机摊铺、压路机碾压。在施工过程中,现场冷再生机械属于一次性成型(即冷再生机械一次通过待修复道路后完成铣、拌、铺筑),以便随着施工进度的推进陆续打通已完工的道路。它可以大大缩短维护路面和提早开放交通所需的时间。
  3. The construction efficiency is high. The traditional road construction technology is to grind the waste road surface with milling machine, then transport it to the mixing plant for mixing treatment, and then transport it back to the construction site to pave with paver and roller to roll. In the construction process, the cold recycling machinery on site belongs to one-time molding (that is, the cold recycling machinery passes through the road to be repaired at one time, and then the milling, mixing and paving are completed), so as to open up the completed roads with the progress of construction. It can greatly reduce the time required to maintain the road surface and open traffic earlier.
  4、保护生态环境,从而有效的节约资源和能源。由于冷再生机铣后的废料几乎全部可以直接送入搅拌仓进行地面搅拌摊铺,减少了新石料的开采,不需要考虑废料的运输和堆放。大大地保护了环境。冷再生器在工作中不需要加热和混合物料,节省了大量能源。冷再生机是对废旧路面原材料进行再利用的一种设备。它没有污染,因此被称为绿色建筑技术。
  4. Protect the ecological environment, so as to effectively save resources and energy. Since almost all the waste after cold recycling machine milling can be directly sent to the mixing bin for mixing and paving on the ground, the exploitation of new stones is reduced, and the transportation and stacking of waste materials are not necessary. It has greatly protected the environment. The cold regenerator does not need heating and mixing materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment for recycling the raw materials of waste pavement. It has no pollution, so it is called green building technology.
  5、有效的降低了施工成本。与传统施工方法相比,冷再生机械租赁后在施工过程中省略了大量的设备、人员和材料,相对成本就比较低。
  5. The construction cost is effectively reduced. Compared with the traditional construction method, a large number of equipment, personnel and materials are omitted in the construction process after the leasing of cold recycling machinery, so the relative cost is relatively low.
  • 上一条:水泥撒布车撒布不均匀的补救方法?
  • 下一条:水泥撒布车有哪几种取力方式?
  • 相关产品: