The basic usage conditions of traditional milling machines after leasing:
Firstly, the surface of high-speed railway box beams is milled and flattened, and the ultra-high area of the bottom plate is milled and flattened.
Secondly, the process of roughening the surface of the ordinary main waterproof layer for concrete bridges.
Thirdly, if the asphalt pavement bursts and there are mesh cracks, the potholes should be promptly milled and cleaned.
Fourthly, the crushing and roughness of the original road before the new asphalt concrete is added.
Fifth, road routes, paint factory floors, and completely remove various hot melt materials.
When starting construction after the cold regeneration lease, due to normal friction between the tire and coating, the faster the milling machine operates, the faster its working speed. Therefore, its use resistance will naturally increase, friction will become more severe, and ultimately the sliding speed of the milling machine will be higher. Controlling the working speed of the milling machine can lead to the ultimate effect of controlling the sliding coefficient.
In theory, increasing adhesion can improve the basic performance of adhesion and reduce slip loss. However, if the adhesion is too large, it will increase the degree of tire wear and may even cause slipping on site. Therefore, appropriately increasing adhesive gravity can to some extent reduce the losses caused by slip.
This article is provided for technical support by leasing cold recycling machines. For more detailed and exciting content, please click on our website https://www.sddhfjx.com We will wholeheartedly provide you with satisfactory service.