欢迎访问山东途畅路桥工程有限公司网站!

冷再生机租赁

施工租赁热线

18264104888

您现在所在的位置 :首页 - 新闻中心 > 公司新闻

公司新闻

冷再生机使用的技术有哪些优点?

来源:https://www.sddhfjx.com/ 日期:2023-04-19
较之传统的道路维修改造方法,道路就地冷再生工艺有着无可比拟的诸多优点。下面冷再生机租赁厂家从七个方面为您讲解:
Compared to traditional road maintenance and renovation methods, the on-site cold regeneration process of roads has many incomparable advantages. The manufacturer of cold regeneration machine leasing will explain to you from seven aspects:
1、成本低
1. Low cost
根据国外的施工资料介绍,与在旧铺层上加铺新料的方法相比,就地冷再生约可降低成本20%~46%。
According to foreign construction materials, compared to the method of adding new materials to the old pavement layer, on-site cold recycling can reduce costs by about 20% to 46%.
2、提高旧路等级
2. Raise the level of old roads
可以通过基层承载力的提高从根本上实现道路等级的提高,这对低等级公路尤其有特殊意义。
The improvement of road grade can be fundamentally achieved through the improvement of grassroots bearing capacity, which is of special significance for low-grade highways.
3、结构的完整性
3. Structural integrity
冷再生施工产生的均匀的较厚铺层内,不存在传统施工方法中有时出现的较薄铺层间的薄弱界面。
There is no weak interface between the thinner layers that sometimes occurs in traditional construction methods within the uniform and thicker layers produced by cold regeneration construction.
4、不损坏路基
4. Not damaging the roadbed
由于冷再生施工为一次性作业方式,再生机组在暴露的路基上只通过一次。所以与传统施工方法相比,对路基的损害较小。
Due to the one-time operation of cold regeneration construction, the regeneration unit only passes through the exposed roadbed once. So compared to traditional construction methods, the damage to the roadbed is relatively small.
冷再生机租赁
5、节约材料
5. Material saving
所有旧铺层材料全部就地利用,从而大大减少了新材料的用量,保护了资源。
All old paving materials are utilized on-site, greatly reducing the amount of new materials and protecting resources.
6、工期短
6. Short construction period
由于不存在旧料的运输问题,不需要其他机械对旧料的靶松和破碎,不需要大块材料的去除和专门破碎,更重要的是施工过程的一次性作业特点大大简化了施工程序,从而节约了施工时间。
Due to the absence of transportation issues for old materials, there is no need for other machinery to target and crush old materials, and there is no need for the removal and specialized crushing of large blocks of materials. More importantly, the one-time operation characteristics of the construction process greatly simplify the construction process, thereby saving construction time.
7、保护环境
7. Protecting the environment
因为旧料的利用大大减少了新材料的开采量,也不存在旧料的运输和堆放问题。从根本上满足了环境保护的要求。
Because the utilization of old materials greatly reduces the mining output of new materials, there is no problem of transportation and stacking of old materials. Fundamentally meeting the requirements of environmental protection.
次用的冷再生技术,就是将原旧沥青混凝土路面破碎后进行再生利用。相对于传统的路面大修工艺技术,该技术具有路面旧材料100%利用、大大缩短施工工期、环境污染小、交通影响小、节约造价等显著优点,同时减少了废渣清运、另外取土等环节,了道路旧料浪费的问题,具有能源消耗少、社会经济效益好等优点,有利于促进公路建设绿色高质量发展。
The secondary cold recycling technology is to crush the original asphalt concrete pavement and recycle it. Compared to traditional road surface overhaul technology, this technology has significant advantages such as 100% utilization of old road materials, greatly shortening construction period, low environmental pollution, small traffic impact, and cost saving. At the same time, it reduces waste residue removal, additional soil collection, and solves the problem of waste of road materials. It has advantages such as low energy consumption and good social and economic benefits, which is conducive to promoting green and high-quality development of highway construction.
目前,养护工程的各项工作正在有序进行,待碾压成型,养生到位后将进行水泥稳定碎石基层铺筑。您对该设备有需求就来咨询联系我们https://www.sddhfjx.com吧!
At present, the various works of the maintenance project are being carried out in an orderly manner, and after being compacted and cured, the cement stabilized crushed stone base will be paved. If you have any needs for this device, please contact us for consultation https://www.sddhfjx.com Come on!
  • 上一条:关于水泥撒布车设备,您了解吗?
  • 下一条:路拌机作业的程序与规程
  • 相关产品: