The cement spreader is a kind of engineering pavement equipment, which is used to evenly spray various powders such as cement on the pavement that needs to be paved with powder. Compared with the traditional manual paving, it has the characteristics of high efficiency and short time uniform paving, but at the same time, there is the problem of uneven paving, resulting in cement stripes on the road. Then what should we do about uneven distribution and its main uses? Next, the small editor of the cement spreader rental manufacturer will take you to understand the relevant content, hoping to help you.
1、 What is the main purpose?
1. Spread cement and powder during road construction. Simply put the cement into the spreader to construct. According to the actual situation of the road, the paver can use different number of powder spreaders to ensure a smooth road surface.
2. During the construction of road reconstruction, powdery ash was diffused.
3. The spreader can also be spread on the mountain covered with dust and fly ash, which is environmentally friendly/dust-free/safe and widely popular in the construction industry.
2、 What about uneven distribution?
1. Improve nozzle structure. The cement flow rate sprayed by each nozzle is the same, and the shape and area of the nozzle can meet the design requirements, and the construction requirements of different types of cement can be met, and good results have been achieved.
2. Increase the propagation speed of vehicles appropriately.
When the speed is increased, the amount of cement sprayed per unit time becomes larger, and the amount of cement spray per unit area remains unchanged, so the change of speed has a great impact on the propagation effect.
Spreader is a special equipment for laying subgrade powder. It is widely used in the foundation reinforcement construction of roads such as highways and railways. The lifting appliance will not cause any pollution or harm to the environment and human body during the whole operation process.
According to the data, the spreader can spread 20000 square meters of powder evenly every day, saving a lot of time and increasing the amount of paving.
The uniformity of artificial paving powder is different, which causes serious environmental pollution and high requirements for human resources, but the effect is not good. Diffusion of vehicles can solve this problem. Mechanized laying liberates human resources. The effect is very good and very useful. Construction safety has greatly solved the potential safety hazard.
To sum up, the purpose is to spread cement powder on the road. To evenly spread cement, the nozzle structure must be improved and the vehicle speed properly increased. If you have any questions about this, please come to our website https://www.sddhfjx.com Ask about it!