公司新闻

冷再生机出租正确操作使用流程？

来源：https://www.sddhfjx.com/ 日期：2020-08-28

　　冷再生机是工地作业中常用的一种机械。可以有效的帮助施工的工人们加快工作效率和提高工程质量。冷再生机是一种率、多用途的施工机械。主要用于沥青混凝土路面的铣刨以及添加沥青、水等材料后的旧沥青路面的再生。也可用于公路、城乡道路、机场、码头、停车场等工程的基层、底层稳定土现场就地拌和作业。那么大家了解它正确的操作方式吗？下面冷再生机出租的小编和大家分享一下。

　　Cold regenerator is a kind of machinery commonly used in construction site. It can effectively help the construction workers to speed up the work efficiency and improve the quality of the project. Cold regenerator is a kind of high efficiency, multi-purpose construction machinery. It is mainly used for milling of asphalt concrete pavement and regeneration of old asphalt pavement after adding asphalt, water and other materials. It can also be used for on-site mixing of stabilized soil at the base and bottom of highway, urban and rural roads, airports, wharves, parking lots and other projects. So do you know how it works? The following cold recycling machine rental small editor and everyone to share.

　　1.使用后控制台时，需将开关拨到后控制，此时前控制台无作用，此外各个小喷头开关可以使用后控制台打开、关闭。

　　1. When using the rear console, turn the switch to the rear control. At this time, the front console does not work. In addition, each small nozzle switch can be opened and closed by using the rear console.
冷再生机出租

　　2.乳化沥青设备不能灌的太满，加油口盖必须关紧，运输过程中以防沥青溢出。

　　2. The emulsified asphalt equipment cannot be filled too full, and the filler cap must be closed tightly to prevent asphalt overflow during transportation.

　　3.乳化沥青设备在喷洒前一定要检查各阀门位置是否正确。加入乳化沥青设备内的热态沥青必须达到160~180℃的工作温度，长距离运输或工作时间过长，可使用加温装置保温，但不能当作熔油炉。

　　3. Before spraying emulsified asphalt equipment, check whether the valve position is correct. The hot asphalt added into the emulsified asphalt equipment must reach the working temperature of 160 ~ 180 ℃. If the asphalt is transported for a long distance or the working time is too long, the heating device can be used for heat preservation, but it can not be used as an oil melting furnace.

　　以上就是关于冷再机的正确操作方式的介绍，希望对大家有所帮助。如您还有其他疑问欢迎咨询冷再生机http://www.sddhfjx.com网站！

　　The above is the introduction of the correct operation mode of the chiller, hoping to help you. If you have other questions, please consult the cold regenerator http://www.sddhfjx.com Website!

上一条：冷再生机租赁工作中遇到输送带打滑问题该怎么办？

下一条：水泥撒布车施工注意事项!