行业资讯

冷再生技术质量检查程序与设备有关吗？

来源：https://www.sddhfjx.com/ 日期：2021-10-06

一、在开工前负责进行：

1、 Be responsible for:

原材料的验证试验、配合比设计等标准试验及定线等测量工作

Standard tests such as verification test of raw materials, mix proportion design and alignment measurement

特殊材料或工艺的试验、研究、论证及报批

Test, research, demonstration and approval of special materials or processes

施工准备情况的自检

Self inspection of construction preparation

开工报告完成及报批。

Completion and approval of commencement report.

二、在施工过程中负责进行：

2、 Be responsible for:

进行工序及工艺过程的试验检测控制。纠正不良操作方法，改进和提高落后的工艺水平，控制工程的质量标准。

Carry out test, detection and control of process and process. Correct the bad operation methods, improve and improve the backward process level, and control the quality standard of the project.

记录整理施工原始记录。

Record and sort out the original construction records.

对完工的分项工程或部位进行自检评定，形成自检记录，对自检合格的工程提交转序申请报告。

Conduct self inspection and evaluation on the completed subdivisional works or parts, form self inspection records, and submit sequence transfer application report for the works that pass the self inspection.

对工程施工过程中出现的各种影响施工和工程质量的情况、问题，及时进行协调、改正和处理。

Timely coordinate, correct and deal with various situations and problems affecting construction and project quality during project construction.

对工程中出现的质量事故负责按规定的程序和要求进行报告处理。

Be responsible for reporting and handling quality accidents in the project according to the specified procedures and requirements.
冷再生机租赁