欢迎访问山东途畅路桥工程有限公司网站!

冷再生机租赁

施工租赁热线

18264104888

您现在所在的位置 :首页 - 新闻中心 > 行业资讯

行业资讯

维特根3800 CR就地冷再生机的使用

来源:https://www.sddhfjx.com/ 日期:2023-10-06
施工设备 该工程施工所使用的主要设备为:
The main equipment used in the construction of this project are:
维特根 3800 CR 就地冷再生机 1 台
1 Wittgen 3800 CR on-site cold regeneration machine
水泥撒布车、水车、沥青罐车、摊铺机各 1 台
1 cement spreader, 1 water truck, 1 asphalt tank truck, and 1 paver each
压路机 3 台
3 rollers
维特根 3800 CR 就地冷再生机是沥青面层就地冷再生施工的关键设备,该机的工作宽度为 3.8 m,再生深度为 0 ~150 mm,配备 708 kW 的高性能发动机,确保了再生的性。设备不仅能够使用常见的上切铣刨工艺,而且还能够使用维特根研发的下切工艺进行再生施工。当装备了输料皮带,采用下切铣刨工艺获得的再生混合料便被输送到行驶在后面的沥青摊铺机中,然后及时地进行均匀摊铺。
The Wittgen 3800 CR on-site cold regeneration machine is a key equipment for the construction of asphalt surface layer on-site cold regeneration. The machine has a working width of 3.8 meters, a regeneration depth of 0-150 mm, and is equipped with a high-performance engine of 708 kW, ensuring the efficiency of regeneration. The equipment can not only use the common upper cutting and milling process, but also use the lower cutting process developed by Wittgen for regenerative construction. When equipped with a conveyor belt, the recycled mixture obtained through the down cutting and milling process is transported to the asphalt paver driving behind, and then evenly spread in a timely manner.
冷再生机租赁
该设备的独特技术优势体现在以下几个方面。
The unique technical advantages of this device are reflected in the following aspects.
再生宽度为 3.8 m 宽时,可 100 % 再生 15 cm 厚的沥青混凝土层。
When the regeneration width is 3.8 meters, a 15 cm thick asphalt concrete layer can be regenerated by 100%.
以整个工作宽度一次性无缝再生一个车道,施工效率极高。
Seamless regeneration of one lane at a time across the entire working width results in extremely high construction efficiency.
与之匹配的摊铺机具有很大的材料输送能力,故原路面材料的不均匀性得以,并可铺筑出良好的横断面。
The paver matched with it has a great material conveying capacity, so the unevenness of the original road surface material can be eliminated and a good cross-section can be paved.
下切施工作业大大优化材料的级配。
The cutting construction operation greatly optimizes the grading of materials.
双重功能:既能够当作后出料再生机,又可以作为高性能铣刨机进行使用。
Dual function: It can be used as both a rear discharge regeneration machine and a high-performance milling machine.
本文的精彩内容由冷再生机租赁提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:https://www.sddhfjx.com我们有专门的客服为您解答问题
The exciting content of this article is provided by the knowledge provided by Cold Recycling Machine Rental. There are also many exciting content on this website, and you can click to enter more content: https://www.sddhfjx.com We have dedicated customer service to answer your questions
  • 上一条:粉料撒布车取代人工铺设的优势特点
  • 下一条:旧沥青路面冷再生机械的施工要点!
  • 相关产品: