For the powder distributor, the dust removal system is a set of structures that play a very important role in filtering dust during construction and meeting the requirements of environmental protection.
With the use of construction, it is particularly important to regularly maintain and replace the dust removal bag inside the dust removal system. If the vehicle does not work every day, it can be removed and purged once every three months; If the daily workload of the vehicle is 50 tons and the vehicle is operated continuously, it can be disassembled and purged once every 2 months; If the daily workload of the vehicle is more than 100 tons and the continuous operation does not stop, the replacement, purging and maintenance period should be shortened. If the dust removal bag is not replaced or purged regularly, it may cause poor dust removal effect of the vehicle, slight bulge on the roof, and damage to the inner support of the dust removal bag. Now let's talk about how to maintain and replace it.
The rental dust removal system of the powder spreader is located at the rear of the vehicle. During maintenance and replacement, it is necessary to open the rear upper bin cover. After opening the upper bin cover, you can see the dust removal box. The dust removal box also has a sealed cover plate, which should also be opened during maintenance; The side of the dedusting box is a gas cylinder for dedusting, and the solenoid valve is connected at the same time. When disassembling, unscrew the connector at the middle position and disconnect the line from the connector. (It is recommended to take photos and make records before handling the internal structure to avoid forgetting the assembly steps and methods)
Thank you for reading. The source of this article is: rental of cement spreader. For more information and questions, please click: https://www.sddhfjx.com We will continue to work hard to provide you with services. Thank you for your support!