The operation panel of the liquid spreader is installed in the cab. It is the main control platform of the vehicle. Many buttons and keys are installed and distributed on it. Here are their main functions:
Spreader width control button
There are three three three-way spreading systems and five five-way spreading systems. The position is upward. In the automatic working state, the operating system corresponding to each closed control knob will stop working.
The down position is off and the up position is vibrator operation
In the automatic state, the lifting of the leveler of the liquid spreader is not affected by the control knob of the leveler; In the manual state, the adjusting button is upward, and the equalizer will not fall.
Mainly manual and automatic spreading
Control power on and off
Rotation and key adjustment button
Control, adjust and debug the operation of the equipment. See the specific page operation for various functions
Forward and reverse adjustment buttons of gauge and winch
Adjust and control the forward and reverse rotation of the meter and winch. In the forward rotation state, the adjusting button faces the main driving side
As there may be other items in the cab, pay special attention to avoid the operating computer during storage to avoid damaging the operating computer. During construction in summer, the weather is very hot, and other personnel may sit in the vehicle or enjoy the cool, or technicians and supervisors will check while construction. At this time, pay special attention to the vehicle fault caused by the wrong touch of the adjusting button on the operation panel.
This article is dedicated by the cement spreader rental friendship. For more information, please click: https://www.sddhfjx.com We will answer your questions in detail. You are welcome to log in to the website and leave a message