行业资讯

冷再生技术质量检查程序是什么?

来源：https://www.sddhfjx.com/ 日期：2021-04-12

　　冷再生技术质量检查程序的质量体系要结合工程施工的进行顺序、进展情况及时、有效地开展工作。

　　The quality system of cold recycling technology quality inspection procedure should be carried out timely and effectively in combination with the construction sequence and progress.

　　一、在开工前负责进行：

　　1、 Be responsible for the following before the commencement of Construction:

　　1)原材料的验证试验、配合比设计等标准试验及定线等测量工作;2)特殊材料或工艺的试验、研究、论证及报批;3)施工准备情况的自检;4)开工报告完成及报批。

　　1) Standard tests such as raw material verification test, mix proportion design and other standard tests and alignment survey work; 2) test, research, demonstration and approval of special materials or processes; 3) self inspection of construction preparation; 4) completion and approval of commencement report.

　　二、在施工过程中负责进行：

　　2、 During the construction process, it is responsible for:

　　1.进行工序及工艺过程的试验检测控制。纠正不良操作方法，改进和提高落后的工艺水平，控制工程的质量标准。

　　1. Test and control the process and process. Correct the bad operation method, improve and improve the backward technology level, and control the quality standard of the project.

　　2.记录整理施工原始记录。

　　2. Record and sort out the original construction records.
冷再生机租赁

　　3.对完工的分项工程或部位进行自检评定，形成自检记录，对自检合格的工程提交转序申请报告。

　　3. Carry out self inspection and evaluation for completed sub projects or parts, form self inspection records, and submit application report for sequence transfer of qualified projects.

　　4.对工程施工过程中出现的各种影响施工和工程质量的情况、问题，及时进行协调、改正和处理。

　　4. Timely coordinate, correct and deal with various situations and problems that affect the construction and project quality during the construction process.

　　5.对工程中出现的质量事故负责按规定的程序和要求进行报告处理。

　　5. Report and handle the quality accidents in the project according to the specified procedures and requirements.

　　6.负责落实有关方面关于工程施工及质量的要求或指令。

　　6. Be responsible for implementing the requirements or instructions of relevant parties on project construction and quality.

　　三、工程竣工后负责进行：

　　3、 After the completion of the project, be responsible for:

　　1.对工程进行自检评定工作。

　　1. Carry out self inspection and evaluation for the project.

　　2.整理竣工资料。

　　2. Sort out the completion data.

　　3.完成竣工报告。

　　3. Complete the completion report.