Asphalt cement spreader is always playing an important role in road construction, and the quality of consumption will directly affect the quality of road and other equipment. In order to ensure its better operation, when using asphalt spreader, especially the following matters are required.
1. Before spraying, the asphalt spreader must check whether the valve position is correct. If the hot asphalt in the asphalt spreader reaches the working temperature of 160 ~ 180 ℃, the heating device can be used for heat preservation, but it can not be used as an oil melting furnace.
2. When the asphalt in the asphalt spreader is heated with the extinguisher, the height of the asphalt must exceed the upper plane of the quenching chamber, otherwise the chamber will be burnt out.
3. The asphalt spreader should not be filled too full, and the filler cap should be closed tightly to prevent asphalt overflow during transportation.
4. The vehicle has two front and rear console. When using the front console, the switch should be turned to the front control. At this time, the rear console can only control the lifting and lowering of the nozzle.
To sum up, the asphalt spreader manufacturer will share relevant matters for you. I believe that through the above sharing, you should be more comfortable when using asphalt spreader in the future. Today's sharing of equipment related operation matters is over here. If you want to understand more content, please continue to pay attention to our website.