欢迎访问山东途畅路桥工程有限公司网站!

冷再生机租赁

施工租赁热线

18264104888

您现在所在的位置 :首页 - 新闻中心 > 公司新闻

公司新闻

冷再生机租赁厂家介绍改性沥青生产设备的技术优势!

来源:https://www.sddhfjx.com/ 日期:2020-09-17
  下面具体介绍改性沥青生产设备的技术优势,想要了解相关内容的小伙伴可以跟着冷再生机租赁厂家一起来看看。
  The following describes the technical advantages of modified asphalt production equipment. If you want to know the relevant content, you can follow the rental manufacturer of cold recycling machine to have a look.
  1、运行稳定,故障少。这个系列设备配备两套独立的加热系统,就算是其中一套出现故障,另一套也可以支持设备生产,这样就可以有效避免由于冷再生机改性沥青设备故障而导致工期延误。
  1. Stable operation and few faults. This series of equipment is equipped with two sets of independent heating systems. Even if one of them fails, the other can support the production of the equipment, which can effectively avoid the delay of construction period caused by the failure of the modified asphalt equipment of the cold regenerator.
  2、对沥青适用面广,可以使用各种国产沥青作为基质沥青来进行加工生产。
  2. It has a wide range of applications, and can be processed and produced by using various domestic asphalt as base asphalt.
  3、改性沥青设备功能强大,不仅可以用于SBS改性沥青生产,还可以用于胶粉改性沥青及其他多种高粘度改性沥青的生产。
  3. The modified asphalt equipment has powerful functions, which can be used not only in SBS modified asphalt production, but also in rubber powder modified asphalt and other high viscosity modified asphalt production.
  4、操作简便,管理成本低。而且对技术人员要求不高。
  4. The operation is simple and the management cost is low. And the requirements for technical personnel are not high.
                           冷再生机租赁厂家
  冷再生机设备的工作效率跟操作者有很大的关系,操作方法正确那么其工作效率也高,如何正确的操作冷再生设备?
  The working efficiency of cold regenerator equipment has a great relationship with the operator. If the operation method is correct, the working efficiency is also high. How to operate the cold regeneration equipment correctly?
  1.使用后控制台时,需将开关拨到后控制,此时前控制台无作用,此外各个小喷头开关可以使用后控制台打开、关闭。
  1. When using the rear console, turn the switch to the rear control. At this time, the front console does not work. In addition, each small nozzle switch can be opened and closed by using the rear console.
  2.乳化沥青设备不能灌的太满,加油口盖要关紧,运输过程中以防沥青溢出。
  2. The emulsified asphalt equipment should not be filled too full, and the filler cap should be closed tightly to prevent asphalt overflow during transportation.
  3.乳化沥青设备在喷洒前一定要检查各阀门位置是否正确。加入乳化沥青设备内的热态沥青要达到160~180℃的工作温度,长距离运输或工作时间过长,可使用加温装置保温,但不能当作熔油炉。
  3. Before spraying emulsified asphalt equipment, check whether the valve position is correct. The hot asphalt added into the emulsified asphalt equipment should reach the working temperature of 160 ~ 180 ℃. If it is transported for a long distance or the working time is too long, the heating device can be used for heat preservation, but it can not be used as an oil melting furnace.
  以上就是冷再生机租赁厂家介绍的全部内容了,关于其技术优势就介绍这么多了,希望本文的介绍能对大家有帮助。
  The above is the whole content introduced by the cold recycling machine rental manufacturer, so much about its technical advantages. I hope the introduction of this article can help you.
  • 上一条:泡沫沥青冷再生技术被鼎力推广的原因!
  • 下一条:路面冷再生机出租和稳定土路拌机主要区别在哪里?
  • 相关产品: