公司新闻

冷再生质量控制应该怎么做？

来源：https://www.sddhfjx.com/ 日期：2020-09-10

　　工程在施工中，都需要质量的控制，这样才能保证后续的效果。那么，冷再生质量控制该怎么办?

　　In the construction of the project, all need quality control, so as to ensure the follow-up effect. So, how to control the quality of cold regeneration?

　　想要保证冷再生的质量控制，要按照以下三点来做：

　　To ensure the quality control of cold regeneration, the following three points should be followed:

　　1.施工前要进行原材料的各项试验，检验合格后方可使用。施工前要进行混合料的各项试验，当确认材料未发生变化时，方可施工。

　　1. Various tests of raw materials shall be carried out before construction, and they can be used only after passing the inspection. Before the construction, various tests of mixture shall be carried out, and the construction can be carried out only when it is confirmed that the materials have not changed.
冷再生机租赁

　　2.施工中应随时检测混合料中结合料与添加剂等的含量，保证施工质量。

　　2. During the construction, the content of binder and additives in the mixture should be detected at any time to ensure the construction quality.

　　3.施工中应根据混合料的拌和和易性等情况及时调整用水量。

　　3. During the construction, the water consumption should be adjusted in time according to the mixing and workability of the mixture.

　　以上是关于冷再生质量控制做法的相关内容介绍，希望对大家有所帮助，如您想要了解更多内容欢迎关注我们的网站。

　　The above is about the cold recycling quality control practices related content introduction, I hope to help you, if you want to know more content, please pay attention to our website.

上一条：租赁冷再生机时需要注意哪些问题？

下一条：冷再生机机械保养注意事项？